Flashing Official ROM on Samsung J SM-J100H/DS Android 4.4.4
This Samsung J SM-J100H/DS was brought to us because of our customer insisted for the phone to be install with a new firmware even though after we inspect that the phone was in good condition and after factory reset also we found it already on a latest version of firmware.
So we couldn’t resist and here we go
By following our guides here we are consider you’ve done necessary backup important data and contact list
Tools needed before attempting flashing process:
1: Firmware of Samsung J SM-J100H/ds and if you need the firmware that support your own local language pick the right version (ex: XME for Malaysia)
Launch Odin 3.09, run as administrator in case needed
Turn off the phone and enter into Download Mode by holding Volume down + power button simultaneously (also tried Volume Down + Home Button + Power Button) and after entering the warning page, press volume Up to continue
Connect Samsung J to the PC and let the driver installed, if you have previously installed Samsung Kies so the installation of the driver should be automatically configure locally. If wasn’t you have to installed Samsung USb Driver before attempting to flash. After the PC recognized the Samsung J, The driver should be listed under Device Manage >> Modem
Preparing the ODin Software, Only browse for AP/PDA and located the Samsung J firmware with the extension .tar.md5 inside the firmware folder. if you download in Win rar version, extract first to your local hard disk. Leave the rest blank, don’t messed up with the Partition or PIT file.
- Uncheck re-partition. Check Auto Reboot and F. Reset Time. e.
Click start to continue flashing
When completed it will show RESET! and the log report will asked to remove device from PC and to power device to continue installing applications and setting.